Filter
Top Products
Installing Printer Drivers on Computers Running Windows 93
4
Select
Local Installation
, and then click
Next
.
5
Check if the printer to be installed is listed in the
Select Printer
, and then
click
Next
.
NOTE: If the printer to be installed is not listed in the Select Printer, try the
following steps:
• Click Refresh to update the information.
• Click Add Printer, and then enter the details of the printer manually.
6
Configure the required items on the
Enter Printer Settings
screen, and
then click
Next
.
7
Select the software to be installed, and then click
Install
.
The
Congratulations!
screen appears.
8
Click
Finish
to exit this tool.
The wireless configuration is complete.
When the WPS-PIN operation is successful and the printer is rebooted,
wireless LAN connection is completed.
WPS-PBC
NOTE: WPS-PBC (Wi-Fi Protected Setup-Push Button Configuration) is a method to
authenticate and register devices required for wireless configuration, by pressing
the button provided on the access point via wireless routers, and then performing
WPS-PBC setting on the operator panel. This setting is available only when the
access point supports WPS.
1
Select
WPS-PBC
, and then click
Next
.
2
Follow the instructions until the
Check Setup
screen appears.
3
Confirm there are no errors displayed on the operator panel, and then click
NO
on the
Check Setup
screen.
NOTE: If you see any errors, click YES and follow the instruction.