Filter
Top Products
74 Installing Printer Drivers on Computers Running Windows
13
As the driver installation is completed, click
Print a test page
to print a test
page. To use this printer as the default printer, select the
Set as the default
printer
check box.
14
Click
Finish
.
Network Connection Setup
Network Printer Setup on a Local Network
For installing host-based printer driver
1
Click
Software Installation
.
2
Select
Network Installation
, and then click
Next
.
3
Select
Local Installation
, and then click
Next
.
4
Select the printer you want to install from the printer list, and then click
Next
. If the target printer is not displayed on the list, click
Refresh
to
refresh the list or click
Add Printer
to add a printer to the list manually.
You may specify the IP address and port name at this point.
If you have installed this printer on the server computer, select
I am
setting up this printer on a server
check box.
NOTE: When using AutoIP, 0.0.0.0 is displayed in the installer. Before you can
continue, you must enter a valid IP address.
NOTE: If you are running any of the following operating systems, a Windows
Security Alert is displayed:
• Windows Vista
• Windows Vista 64-bit Edition
• Windows Server 2008
• Windows Server 2008 64-bit Edition
• Windows Server 2008 R2 64-bit Edition
• Windows 7
• Windows 7 64-bit Edition
To continue installing the host-based printer driver, click
Unblock
or
Allow access
(for Windows Server 2008 R2 and Windows 7).
5
Specify the printer settings, and then click
Next
.