Filter
Top Products
380 Understanding the Printer Menus
Protocol
Purpose:
To enable or disable each protocol. The change becomes effective after the
printer is turned off and then on.
Valu es:
IPv4 Get IP
Address
AutoIP* Automatically sets the IP address.
BOOTP Uses BOOTP to set the IP address.
RARP Uses RARP to set the IP address.
DHCP Uses DHCP to set the IP address.
Panel Enables the IP address entered on the operator
panel.
IP Address Manually sets the IP address allocated to the printer.
Subnet Mask Manually sets the subnet mask.
Gateway Address Manually sets the gateway address.
LPD Disable Disables the LPD port.
Enable* Enables the Line Printer Daemon (LPD) port.
Port9100 Disable Disables the Port9100 port.
Enable* Enables the Port9100 port.
WSD Disable Disables the WSD port.
Enable* Enables the WSD port.
SNMP Disable Disables the SNMP UDP port.
Enable* Enables the Simple Network Management Protocol
(SNMP) UDP port.
E-Mail Alerts Disable Disables the E-Mail Alert feature.
Enable* Enables the E-Mail Alert feature.
EWS Disable Disables an access to Dell Printer Configuration
Web Tool embedded in the printer.
Enable* Enables an access to Dell Printer Configuration
Web Tool embedded in the printer.