Filter
Top Products
Dell Printer Configuration Web Tool 177
Scan to PC
Purpose:
To specify the client when scanning data.
Va l ue s :
Trap
Notification
1-4
Trap Address Type Select the trap address type from the list.
Selecting Off clears the settings in Trap Address,
Port Number, and Notify, and does not notify
trap occurrence. Selecting IPv4 or IPv6 allows
you to enter Trap Address.
Trap Address Specifies the IP address and IP socket in the
following format:
•IPv4
Specifies the IP address and IP socket in the
nnn.nnn.nnn.nnn:mmmmm format. Each
section of "nnn" is a variable value between 0
and 255. Note that values 127 and 224-254 are
not valid for the first three-digits only. IP socket
mmmmm is a variable value between 0 and
65535.
•IPv6
Specifies the IP address and IP socket in the
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:mmm
mm format. Each section of "xxxx" is a
hexadecimal variable value between 0 and ffff.
IP socket mmmmm is a variable value between 0
and 65535.
Trap Notification
(IP) Port Number
Enter the SNMP trap destination port number.
Notify Specifies whether to notify trap occurrence.
Authenticate Error Trap Specifies whether to notify Authenticate Error
Tr ap .
FTP Client Connection
Time-Out
Sets the connection time-out period from 1 to 60
seconds.
FTP Passive Sets whether to enable the FTP Passive mode.