Filter
Top Products
Faxing 301
For details about loading a document, see "Loading an Original Document
on the ADF" on page 296.
2
Press the
(Fax)
button.
3
Adjust the document resolution to suit your fax needs. For more
information, see "Resolution" on page 298.
If you need to change the contrast, see "Lighter/Darker" on page 299.
4
Press the button until
OnHook
is highlighted, and then press the
button.
5
Press the button until
On
is highlighted, and then press the
button.
6
Enter the fax number of the remote fax machine using the numeric
keypad.
• If the document is loaded on the ADF, press the
(Start)
button.
• If the document is not loaded on the ADF, press the
(Start)
button,
press the
button until the desired setting appears, and
then press the button.
NOTE: Press the (Cancel) button and the button to cancel the fax job at
any time while sending the fax.
Confirming Transmissions
When the last page of your document has been sent successfully, the printer
beeps and returns to the standby mode.
If something goes wrong while sending your fax, an error message appears on
the display.
If you receive an error message, p
ress
the (Cancel) button to clear the
message and try to send the document again.
You can set your printer to print a confirmation report automatically after
each fax transmission. For more information, see "Printing a Report" on
page 319.