D-Link DES-3500Series Switch User Manual


 
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
6
DES-3526:admin#show
Command: show
Next
possible completions:
802.1p 802.1x access_profile account
address_binding arp_spoofing_prevention arpentry
asymmetric_vlan authen authen_enable authen_login
authen_policy autoconfig bandwidth_control command_history
config cpu cpu_filter
cpu_interface_filtering current_config dhcp_local_relay
dhcp_relay error fdb filter
firmware flow_meter gratuitous_arp greeting_message
gvrp igmp_snooping ipif iproute
lacp_port limited_multicast_addr link_aggregation
lldp log loopdetect mac_notification
mirror multicast multicast_fdb multicast_range
packet port_security ports radius
router_ports safeguard_engine scheduling serial_port
session sim snmp sntp
ssh ssl stp switch
syslog system_severity tech_support terminal_line
time time_range traffic
traffic_segmentation trusted_host utilization
vlan
DES-3526:admin#
Figure 2-6. Next possible completions: Show Command
In the above example, all of the possible next parameters for the show command are displayed. At the next command prompt, the
up arrow was used to re-enter the show command, followed by the account parameter. The CLI then displays the user accounts
configured on the Switch.