D-Link DES-3500Series Switch User Manual


 
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
173
show 802.1x auth_configuration
Capability: Authenticator/None Shows the capability of 802.1x
functions on the port number displayed above. There are two 802.1x
capabilities that can be set on the Switch: Authenticator and None.
AdminCtlDir: Both / In Shows whether a controlled Port that is
unauthorized will exert control over communication in both receiving
and transmitting directions, or just the receiving direction.
OpenCtlDir: Both / In Shows whether a controlled Port that is
unauthorized will exert control over communication in both receiving
and transmitting directions, or just the receiving direction.
Port Control: ForceAuth / ForceUnauth / Auto Shows the
administrative control over the port’s authorization status. ForceAuth
forces the Authenticator of the port to become Authorized.
ForceUnauth forces the port to become Unauthorized.
QuietPeriod Shows the time interval between authentication failure
and the start of a new authentication attempt.
TxPeriod Shows the time to wait for a response from a supplicant
(user) to send EAP Request / Identity packets.
SuppTimeout Shows the time to wait for a response from a supplicant
(user) for all EAP packets, except for the Request / Identity packets.
ServerTimeout Shows the length of time to wait for a response from a
RADIUS server.
MaxReq Shows the maximum number of times to retry sending
packets to the supplicant.
ReAuthPeriod Shows the time interval between successive re-
authentications.
ReAuthenticate: Enabled / Disabled Shows whether or not to re-
authenticate.
Restrictions None.
Example usage:
To display the 802.1x authentication states:
DES-3526:admin#show 802.1x auth_configuration ports 1
Command: show 802.1x auth_configuration ports 1
802.1X : Enabled
Authentication Mode : Port_based
Authentication Protocol : Radius_Eap
Port number : 1
Capability : None
AdminCrlDir : Both
OpenCrlDir : Both
Port Control : Auto
QuietPeriod : 60 sec
TxPeriod : 30 sec
SuppTimeout : 30 sec
ServerTimeout : 30 sec
MaxReq : 2 times
ReAuthPeriod : 3600 sec
ReAuthenticate : Disabled
CTRL+C ESC q Quit SPACE n Next Page Enter Next Entry a All