Filter
Top Products
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
60
disable autoconfig
Purpose Use this to deactivate autoconfiguration from DHCP.
Syntax
disable autoconfig
Description This instructs the Switch not to accept autoconfiguration instruction from the
DHCP server. This does not change the IP settings of the Switch. The ipif
settings will continue as DHCP client until changed with the config ipif
command.
Parameters None.
Restrictions None.
Example usage:
To stop the autoconfiguration function:
DES-3526:admin#disable autoconfig
Command: disable autoconfig
Success.
DES-3526:admin#
show autoconfig
Purpose Used to display the current autoconfig status of the Switch.
Syntax
show autoconfig
Description This command will list the current status of the autoconfiguration
function.
Parameters None.
Restrictions None.
Example usage:
To upload a:
DES-3526:admin#show autoconfig
Command: show autoconfig
Autoconfig disabled.
Success.
DES-3526:admin#
NOTE: With autoconfig enabled, the Switch ipif settings now define the Switch as a
DHCP client. Use the show switch command to display the new IP settings status.