Filter
Top Products
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
56
config firmware image_id
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure firmware section 1 as a boot up section:
DES-3526:admin# config firmware section_id 1 boot_up
Command: config firmware section_id 1 boot_up
Success.
DES-3526:admin#
show firmware information
Purpose Used to display the firmware section information.
Syntax
show firmware information
Description This command is used to display the firmware section information.
Parameters None.
Restrictions None
Example usage:
To display the current firmware information on the Switch:
DES-3526:admin#show firmware information
Command: show firmware information
ID Version Size(B) Update Time From User
-- -------- ------- ------------------- ------------------ ---------------
1 4.01-B09 2711821 00000 days 00:00:00 Serial Port (PROM) Unknown
*2 5.01-B47 3281614 00000 days 00:12:34 10.73.21.1 RG
'*' means boot up section
(T) means firmware update through TELNET
(S) means firmware update through SNMP
(W) means firmware update through WEB
(SIM) means firmware update through Single IP Management
Free space: 2097152 bytes
DES-3526:admin#
show config
Purpose Used to display the current or saved version of the configuration settings of the
switch.
Syntax
show config [current_config | config_in_nvram]
Description Use this command to display all the configuration settings that are saved to NV
RAM or display the configuration settings as they are currently configured. Use the
keyboard to list settings one line at a time (Enter), one page at a time (Space) or
view all (a).
The configuration settings are listed by category in the following order: