Filter
Top Products
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
172
enable 802.1x
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To enable 802.1x switch wide:
DES-3526:admin#enable 802.1x
Command: enable 802.1x
Success.
DES-3526:admin#
disable 802.1x
Purpose Used to disable the 802.1x server on the Switch.
Syntax
disable 802.1x
Description
The disable 802.1x command is used to disable the 802.1x Network
Access control server application on the Switch. To select between port-
based or MAC-based, use the config 802.1x auth_mode command.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To disable 802.1x on the Switch:
DES-3526:admin#disable 802.1x
Command: disable 802.1x
Success.
DES-3526:admin#
show 802.1x auth_configuration
Purpose Used to display the current configuration of the 802.1x server on the
Switch.
Syntax
show 802.1x auth_configuration {ports <portlist>}
Description
The show 802.1x user command is used to display the 802.1x Port-
based or MAC-based Network Access control local users currently
configured on the Switch.
Parameters
ports <portlist> − Specifies a port or range of ports to view.
The following details are displayed:
802.1x Enabled / Disabled − Shows the current status of 802.1x
functions on the Switch.
Authentication Mode – Shows the authentication mode, whether it be
by MAC address or by port.
Authentication Protocol: Radius_Eap − Shows the authentication
protocol suite in use between the Switch and a RADIUS server. May
read Radius_Eap or Radius_Pap.
Port number − Shows the physical port number on the Switch.