Filter
Top Products
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
208
show filter netbios
Description This command will display the switch settings to filter NetBIOS packets from
the specified ports.
Parameters None.
Restrictions None.
Example usage:
To display the extensive NetBIOS filter status:
DES-3526:admin#show filter netbios
Command: show filter netbios
Enabled ports 1-3
DES-3526:admin#
config filter extensive_netbios
Purpose Used to configure the switch to filter 802.3 frame NetBIOS packets from
specified ports.
Syntax
config filter extensive_netbios <portlist> state [enable|disable]
Description This command will configure the switch to filter 802.3 frame NetBIOS
packets from the specified ports.
Parameters
<portlist> – The list of port numbers to which the NetBIOS filter will be
applied.
state [enable|disable] – Used to enable/disable the NetBIOS filter on the
switch.
Restrictions Only Administrator and Operator-level users can issue this command.
Enabling the NetBIOS filter will create one access profile and one access
rules per port (DSAP=F0, SASP=F0).
Example usage:
To configure the extensive NetBIOS state::
DES-3526:admin#config filter extensive_netbios 1-10
state enable
Command: config filter extensive_netbios 1-10 state
enable
Success.
DES-3526:admin#
show filter extensive_netbios
Purpose Used to display the switch settings to filter NetBIOS packets from specified
ports.
Syntax
show filter extensive_netbios
Description This command will display the switch settings to filter NetBIOS packets from
the specified ports.
Parameters None.
Restrictions None.