Filter
Top Products
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
315
45
TECHNICAL SUPPORT COMMANDS
The Technical Support commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command Parameters
show tech_support
Each command is listed, in detail, in the following sections.
show tech_support
Purpose Used to show the information for technical support.
Syntax
show tech_support
Description This command is especially used by the technical support personnel to
dump the device’s overall operation information. The information is
project dependent and includes the following information.
Basic System information
system log
Running configuration
Layer 1 information
Layer 2 information
Layer 3 information
Application
OS status
Controller's status
Parameters None.
Restrictions Only Administrator or Operator – level users can issue this command.
Example usage:
To config ARP Spoofing Prevention:
DES-3526:admin#show tech_support
Command: show tech_support
=================================================================
DES-3526 Fast Ethernet Switch
Technique Information Report
=================================================================
Basic System Information
------------------------------------------------------
[System Time 1728ms]
System Uptime : 0 Days 00:05:38
Current Time :
[Device Information 1748ms]
Device Type : DES-3526 Fast-Ethernet Switch
MAC Address : 00-15-E9-41-5A-B9
IP Address : 10.73.21.51 (Manual)
VLAN Name : default