D-Link DES-3500Series Switch User Manual


 
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
127
Command Parameters
create address_binding
ip_mac ipaddress
<ipaddr> mac_address <macaddr> {ports [<portlist> | all] | mode {arp | acl]}
config address_binding
ip_mac ipaddress
<ipaddr> mac_address <macaddr> {ports [<portlist> | all] | mode {arp | acl]}
config address_binding
ip_mac ports
[<portlist> | all] state [enable {[strict | loose]} | disable ]
config address_binding
ip_mac ports
[<portlist> | all] allow_zeroip [eable|disable]
config address_binding
ip_mac ports
[<portlist> | all] forward_dhcppkt [enable | disable]
show address_binding [ip_mac {[all | ipaddress <ipaddr> mac_address <macaddr>]} | blocked {[all |
vlan_name <vlan_name> mac_address <macaddr>]} | ports]
delete address_binding [ip-mac [ipaddress <ipaddr> mac_address <macaddr> |all] | blocked [all |
vlan_name <vlan_name> mac_address <macaddr>]]
enable address_binding
acl_mode
disable address_binding
acl_mode
enable address_binding
trap_log
disable address_binding
trap_log
show address_binding
dhcp_snoop
{[max_entry {ports <portlist> | binding_entry {port <port>}]}
enable address_binding
dhcp_snoop
disable address_binding
dhcp_snoop
clear address_binding
dhcp_snoop
binding_entry ports
[<portlist> | all]
config address_binding
dhcp_snoop max_entry
ports
[<portlist> | all] limit [<value 1-10> | no_limit]
create address_binding
permit_ip_pool start_ip
<ipaddr> end_ip <ipaddr> ports [<portlist>|all]
config address_binding
permit_ip_pool start_ip
<ipaddr> end_ip <ipaddr> ports [<portlist>|all]
delete address_binding
permit_ip_pool start_ip
<ipaddr> end_ip <ipaddr>
show address_binding
permit_ip_pool
Each command is listed, in detail, in the following sections.