Filter
Top Products
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
293
config lldp forward_message
Purpose Used to configure forwarding of lldpdu packet when LLDP is disabled.
Syntax
config lldp forward_message [enable | disable]
Description When lldp is disabled and lldp forward_message is enabled, the
received LLDPDU packet will be forwarded. The default state is disable.
Parameters None.
Restrictions Only Administrator or Operator – level users can issue this command.
Example usage:
To configure the LLDP forward_lldpdu:
DES-3526:admin# config lldp forward_ message enable
Command: config lldp forward_ message enable
Success.
DES-3526:admin#
show lldp
Purpose This command displays the switch’s general LLDP configuration status.
Syntax
show lldp
Description This command displays the switch’s general LLDP configuration status.
Parameters None.
Restrictions None.
Example usage:
To display the LLDP system level configuration status:
DES-3526:admin#show lldp
Command: show lldp
LLDP system information
Chassis Id Subtype : MACADDRESS
Chassis Id : 00-15-E9-41-5A-A7
System Name : D-Link
System Description : Fast Ethernet Switch
System Capabilities : Repeater, Bridge,
LLDP Configurations
LLDP Status : Disable
LLDP Forward Status : Disable
Message Tx Interval : 30
Message Tx Hold Muliplier : 4
ReInit delay : 2
Tx Delay : 2
Notification Interval : 5
DES-3526:admin#