Filter
Top Products
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
131
DES-3526:admin#config address_binding ip_mac ports 2
state enable
Command: config address_binding ip_mac ports 2 state
enable
Success.
DES-3526:admin#
config address_binding ip_mac ports
Purpose Used to configure an IP-MAC state to enable or disable for specified ports.
Syntax
config address_binding ip_mac ports [<portlist> | all] [allow_zeroip
[eable|disable]
Description This command will configure IP-MAC state to enable or disable for specified
ports.
Parameters
<portlist> − Specifies a port or range of ports.
all – specifies all ports on the switch.
allow_zeroip [enable | disable] – Enables or disables zero IP address.
Restrictions User Account Command Level – Administrator and Operator.
Example usage:
To configure address binding on the Switch:
DES-3526:admin#config address_binding ip_mac ports 2
allow_zeroip enable
Command: config address_binding ip_mac ports 2
allow_zeroip enable
Success.
DES-3526:admin#
config address_binding ip_mac ports
Purpose Used to configure an IP-MAC state to enable or disable for specified ports.
Syntax
config address_binding ip_mac ports [<portlist> | all] forward_dhcppkt
[enable | disable]
Description This command will configure IP-MAC state to enable or disable forward
DHCP packet for specified ports.
Parameters
<portlist> − Specifies a port or range of ports.
all – specifies all ports on the switch.
forward_dhcppkt [enable | disable] – Enables or disables forward DHCP
packet. By default, the DHCP packet with broadcast DA will be flooded.
When set to disable, the broadcast DHCP packet received by the specified
port will not be forwarded. This setting is effective when DHCP snooping is
enabled, under which case the DHCP packet which has been trapped to
CPU needs to be forwarded by the software. This setting controls the
forwarding behavior under this situation
Restrictions User Account Command Level – Administrator and Operator.
Example usage:
To configure address binding on the Switch: