Filter
Top Products
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
42
create snmp group
SNMP manager is allowed to access on the Switch.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To create an SNMP group named “sg1:”
DES-3526:admin#create snmp group sg1 v3 noauth_nopriv
read_view v1 write_view v1 notify_view v1
Command: create snmp group sg1 v3 noauth_nopriv read_view
v1 write_view v1 notify_view v1
Success.
DES-3526:admin#
delete snmp group
Purpose
Used to remove an SNMP group from the Switch.
Syntax delete snmp group <groupname 32>
Description The delete snmp group command is used to remove an SNMP
group from the Switch.
Parameters
<groupname 32> − An alphanumeric name of up to 32 characters that
will identify the SNMP group the new SNMP user will be associated
with.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To delete the SNMP group named “sg1”.
DES-3526:admin#delete snmp group sg1
Command: delete snmp group sg1
Success.
DES-3526:admin#
show snmp groups
Purpose
Used to display the group-names of SNMP groups currently configured on
the Switch. The security model, level, and status of each group are also
displayed.
Syntax show snmp groups
Description The show snmp groups command displays the group-names of SNMP
groups currently configured on the Switch. The security model, level, and
status of each group are also displayed.
Parameters
None.
Restrictions
None.
Example usage:
To display the currently configured SNMP groups on the Switch: