Filter
Top Products
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
160
Success.
DES-3526:admin#
config dhcp_relay add ipif
Purpose Used to add an IP destination address to the switch's DHCP/BOOTP
relay table.
Syntax
config dhcp_relay add ipif <ipif_name 12> <ipaddr>
Description This command adds an IP address as a destination to forward (relay)
DHCP/BOOTP relay packets to.
Parameters
<ipif_name 12> The name of the IP interface in which DHCP relay is to
be enabled.
<ipaddr> The DHCP server IP address.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To add an IP destination to the DHCP relay table:
DES-3526:admin#config dhcp_relay add ipif
System 10.58.44.6
Command: config dhcp_relay add ipif System
10.58.44.6
Success.
DES-3526:admin#
config dhcp_relay delete ipif
Purpose Used to delete one or all IP destination addresses from the Switch's
DHCP/BOOTP relay table.
Syntax
config dhcp_relay delete ipif <ipif_name 12> <ipaddr>
Description This command is used to delete an IP destination addresses in the
Switch’s DHCP/BOOTP relay table.
Parameters
<ipif_name 12> The name of the IP interface that contains the IP address
below.
<ipaddr> The DHCP server IP address.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To delete an IP destination from the DHCP relay table:
DES-3526:admin#config dhcp_relay delete ipif
System 10.58.44.6
Command: config dhcp_relay delete ipif System
10.58.44.6
Success.
DES-3526:admin#