Filter
Top Products
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
19
DES-3526:admin#reboot force_agree
Command: reboot force_agree
Are users sure want to proceed with the system
reboot? (y|n)
Please wait, the switch is rebooting...
reset
Purpose Used to reset the Switch to the factory default settings.
Syntax
reset {[config | system {exclude [vlan|system_ip]}] }
{ force_agree}
Description This command is used to restore the Switch’s configuration to the
default settings assigned from the factory.
Parameters
config − If the keyword ‘config’ is specified, all of the factory default
settings are restored on the Switch including the IP address, user
accounts, and the switch history log. The Switch will not save or
reboot.
system − If the keyword ‘system’ is specified all of the factory default
settings are restored on the Switch. The Switch will save and reboot
after the settings are changed to default. Rebooting will clear all
entries in the Forwarding Data Base.
exclude –You can specify to exclude reset of VLAN or system IP
setting .
force_agree- When force_agree is specified, the reset command will
be executed immediatedly without further confirmation.
If no parameter is specified, the Switch’s current IP address, user
accounts, and the switch history log are not changed. All other
parameters are restored to the factory default settings. The Switch
will not save or reboot.
Restrictions Only administrator-level users can issue this command.
Example usage:
To restore all of the Switch’s parameters to their default values:
DES-3526:admin#reset config
Command: reset config
Are users sure to proceed with system reset?(y/n)
Success.
DES-3526:admin#
login
Purpose Used to log in a user to the Switch’s console.
Syntax
login
Description This command is used to initiate the login procedure. The user will be
prompted for a Username and Password.
Parameters None.
Restrictions None.
Example usage:
To initiate the login procedure: