Filter
Top Products
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
278
38
COMMAND HISTORY LIST
The switch history commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command Parameters
?
dir
config command_history <value 1-40>
show command_history
Each command is listed, in detail, in the following sections.
?
Purpose Used to display all commands in the Command Line Interface (CLI).
Syntax
? {<command>}
Description This command will display all of the commands available through the
Command Line Interface (CLI).
Parameters
{<command>} – Entering the question mark with an appropriate
command will list all the corresponding parameters for the specified
command, along with a brief description of the commands function and
similar commands having the same words in the command.
Restrictions None.
Example usage:
To display all of the commands in the CLI:
DES-3526:admin#?
..
?
clear
clear arptable
clear counters
clear fdb
clear log
clear port_security_entry port
config 802.1p default_priority
config 802.1p user_priority
config 802.1x auth_mode
config 802.1x auth_parameter ports
config 802.1x auth_protocol
config 802.1x capability ports
config 802.1x init
config 802.1x reauth
config access_profile profile_id
config account
config admin local_enable
config arp_aging time
config arpentry
config authen application
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
To display the parameters for a specific command: