Filter
Top Products
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
108
show 802.1p default_priority
the highest switch number, and the highest port number of the
range (also separated by a colon) are specified. The beginning and
end of the port list range are separated by a dash. For example, 1:3
specifies switch number 1, port 3. 2:4 specifies switch number 2,
port 4. 1:3-2:4 specifies all of the ports between switch 1, port 3 and
switch 2, port 4 − in numerical order. Non-contiguous portlist entries
are separated by a comma. (ex: 1:1-1:3,1:7-1:9)
Restrictions None.
Example usage:
To display the current 802.1p default priority configuration on the Switch:
DES-3526:admin# show 802.1p
default_priority
Command: show 802.1p default_priority
Port Priority Effective
Priority
------ ---------- -----------------
1 0 0
2 0 0
3 0 0
4 0 0
5 0 0
6 0 0
7 0 0
8 0 0
9 0 0
10 0 0
11 0 0
12 0 0
13 0 0
14 0 0
15 0 0
16 0 0
17 0 0
18 0 0
19 0 0
CTRL+C ESC q Quit SPACE n Next Page ENTER
Next Entry a All