Filter
Top Products
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
241
Example usage:
To configure the default method list with authentication methods XTACACS, TACACS+ and local, in that order:
DES-3526:admin#config aut
hen_enable default method xtacacs
tacacs+ local
Command: config authen_enable default method xtacacs
tacacs+ local
Success.
DES-3526:admin#
delete authen_enable method_list_name
Purpose Used to delete a user-defined method list of authentication methods
for promoting normal user level privileges to Administrator level
privileges on the Switch.
Syntax
delete authen_enable method_list_name <string 15>
Description This command is used to delete a user-defined method list of
authentication methods for promoting user level privileges to
Administrator level privileges.
Parameters
<string 15> - Enter an alphanumeric string of up to 15 characters to
define the given enable method list to delete.
Restrictions User Account Command Level – Administrator.
Example usage:
To delete the user-defined method list “Permit”
DES-3526:admin#delete authen_enable method_list_name
Permit
Command: delete authen_enable method_list_name Permit
Success.
DES-3526:admin#
show authen_enable
Purpose Used to display the method list of authentication methods for promoting
normal user level privileges to Administrator level privileges on the Switch.
Syntax
show authen_enable [default | method_list_name <string 15> | all]
Description This command is used to delete a user-defined method list of
authentication methods for promoting user level privileges to Administrator
level privileges.
Parameters
default – Entering this parameter will display the default method list for
users attempting to gain access to Administrator level privileges on the
Switch.
method_list_name <string 15> - Enter an alphanumeric string of up to 15
characters to define the given method list the user wishes to view.
all – Entering this parameter will display all the authentication login
methods currently configured on the Switch.
The window will display the following parameters:
Method List Name – The name of a previously configured method
list name.
Priority – Defines which order the method list protocols will be