Filter
Top Products
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
133
delete address_binding
Purpose Used to delete IP-MAC Binding entries.
Syntax
delete address_binding ip-mac [ipaddress <ipaddr> mac_address
<macaddr> | all] | blocked [all | vlan_name <vlan_name>
mac_address <macaddr>]]
Description This command will delete IP-MAC Binding entries. Two different kinds
of information can be deleted.
• IP_MAC –Individual Address Binding entries can be deleted by
entering the physical and IP addresses of the device. Toggling
to all will delete all the Address Binding entries.
• Blocked – Blocked address binding entries (bindings between
VLAN names and MAC addresses) can be deleted by entering
the VLAN name and the physical address of the device. To
delete all the Blocked Address Binding entries, toggle all.
Parameters
<ipaddr> The IP address of the device where the IP-MAC binding is
made.
<macaddr> The MAC address of the device where the IP-MAC binding
is made.
<vlan_name> The VLAN name of the VLAN that is bound to a MAC
address in order to block a specific device on a known VLAN.
all – For IP_MAC binding all specifies all the IP-MAC binding entries;
for Blocked Address Binding entries all specifies all the blocked VLANs
and their bound physical addresses.
Restrictions User Account Command Level – Administrator and Operator.
Example usage:
To delete an IP-MAC Binding on the Switch:
DES-3526:admin#delete address-binding ip-mac ipaddress 10.1.1.1
mac_address 00-00-00-00-00-06
Command: delete address-binding ip-mac ipaddress 10.1.1.1 mac_address 00-
00-00-00-00-06
Success.
DES-3526:admin#