Filter
Top Products
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
9
4
BASIC SWITCH COMMANDS
The basic switch commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command Parameters
enable password encryption
disable password encryption
create account [admin | operator | user] <username 15>
{encrypt [plain_text| sha_1] <password>}
config account <username 15>>
{encrypt [plain_text| sha_1] <password>}
show account
delete account [<username 15> | <username 15> force_agree]
show session
show switch
show serial_port
config serial_port {baud_rate [9600 | 19200 | 38400 | 115200] auto_logout [never | 2_minutes |
5_minutes | 10_minutes | 15_minutes]}
enable clipaging
disable clipaging
enable telnet <tcp_port_number 1-65535>
disable telnet
telnet <ipaddr> {tcp_port <value 0-65535>}
enable web <tcp_port_number 1-65535>
disable web
save
reboot
reboot force_agree
reset {[config | system]}
reset {[config force_agree | system force_agree]}
reset { system exclude [vlan | system] }
login
logout
Each command is listed, in detail, in the following sections.
enable/disable password encryption
Purpose
Used to enable or disable password encryption on user accounts
Syntax enable password encryption
disable password encryption
Description
The user account configuration information will be stored in the
configuration file, and can be applied to the system. If password