Filter
Top Products
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
193
Example usage:
To display all of the currently configured access profiles on the Switch:
DES-3526:admin#show access_profile
Command: show access_profile
Access Profile Table
Access Profile ID : 1 Type : Ethernet
==========================================================================
Owner : ACL
Masks :
VLAN
----------------
===========================================================================
ACL Free: System : 800, Port 1-8 : 200, Port 9-16 : 200, Port 17-24: 200
Port 25-32: 200, Port 33-40: 200, Port 41-48: 200, Port 49 : 100
Port 50 : 100, Port 51 : 100, Port 52 : 100
Total Access Entries : 0
DES-3526:admin#
create cpu access_profile
Purpose
Used to create an access profile specifically for CPU Interface Filtering on the Switch and to
define which parts of each incoming frame’s header the Switch will examine. Masks can be
entered that will be combined with the values the Switch finds in the specified frame header
fields. Specific values for the rules are entered using the config cpu access_profile command,
below.
Syntax
create cpu access_profile [ethernet {vlan | source_mac <macmask> | destination_mac
<macmask> | 802.1p | ethernet_type} | ip {vlan | source_ip_mask <netmask> |
destination_ip_mask <netmask> | dscp | [icmp {type | code} | igmp {type} | tcp
{src_port_mask <hex 0x0-0xffff> | dst_port_mask <hex 0x0-0xffff>} | flag_mask [all | {urg |
ack | psh | rst | syn | fin}]} | udp {src_port_mask <hex 0x0-0xffff> | dst_port_mask <hex
0x0-0xffff>} | protocol_id_mask <hex 0x0-0xffffffff>} {user_define_mask <hex 0x0-
0xffffffff>}]} | packet_content_mask {offset 0-15 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff>
<hex 0x0-0xffffffff> <hex 0x0-0xffffffff> | offset 16-31 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff>
<hex 0x0-0xffffffff> <hex 0x0-0xffffffff> | {offset 32-47 <hex 0x0-0xffffffff> <hex 0x0-
0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> | {offset 48-63 <hex 0x0-0xffffffff> <hex
0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> | {offset 64-79 <hex 0x0-0xffffffff>
<hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff>}] profile_id <value 1-5>
Description
The create cpu access_profile command is used to create an access profile used only for CPU
Interface Filtering. Masks can be entered that will be combined with the values the Switch finds in
the specified frame header fields. Specific values for the rules are entered using the config cpu
access_profile command, below.
Parameters
ethernet − Specifies that the Switch will examine the layer 2 part of each packet header.
•
vlan − Specifies that the Switch will examine the VLAN part of each packet header.
•
source_mac <macmask> - Specifies to examine the source MAC address mask.
•
destination_mac <macmask> - Specifies to examine the destination MAC address mask.
•
802.1p - Specifies that the Switch will examine the 802.1p priority value in the frame’s
header.
•
ethernet_type − Specifies that the Switch will examine the Ethernet type value in each
frame’s header.
ip − Specifies that the switch will examine the IP address in each frame’s header.
•
vlan − Specifies a VLAN mask.
•
source_ip_mask <netmask> − Specifies an IP address mask for the source IP address.
•
destination_ip_mask <netmask> − Specifies an IP address mask for the destination IP