Filter
Top Products
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
306
42
DHCP LOCAL RELAY COMMANDS
The DHCP Local Relay commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command Parameters
config dhcp_local _relay
[vlan<vlan_name 32> | vlanid <vlanid_list>] state [enable |
disable]
enable dhcp_local _relay
disable dhcp _local_relay
show dhcp _local_relay
Each command is listed, in detail, in the following sections.
config dhcp_local_relay vlan
Purpose Used to enable/disable DHCP local relay function to vlan.
Syntax
config dhcp_local _relay vlan [<vlan_name 32>|
| |
| vlanid <vlanid_list>]
state [enable | disable]
Description The config dhcp_local_relay vlan command is used to enable /disable
DHCP local relay function for specified vlan. When DHCP local relay is
enabled for the VLAN, the DHCP packet will be relayed in broadcast way
without change of the source MAC address and gateway address. DHCP
option 82 will be automatically added.
Parameters
vlan_name - The name of the VLAN to be enabled DHCP local relay.
vlanid_list - Specified a range of VLAN ID to be created.
state - Enable or disable DHCP local relay for specified vlan.
Restrictions Only Administrator or Operator – level users can issue this command.
Example usage:
To enable DHCP local relay for the default vlan:
DES-3526:admin# config dhcp_local_relay vlan default state enable
Command: config dhcp_local_relay vlan default state enable
Success.
DES-3526:admin#