Filter
Top Products
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
202
config time_range
start_time - Specifies the starting time in a day. (24-hr time)
For example, 19:00 means 7PM. 19 is also acceptable. start_time must be
smaller than end_time.
Start time greater than end time is allowed, in this situation the time range
will continue to the end time of next day.
end_time - Specifies the ending time in a day. (24-hr time)
weekdays - Specify the list of days contained in the time range. Use a dash
to define a period of days. Use a comma to separate specific days.
For example, mon-fri (Monday to Friday)
sun, mon, fri (Sunday, Monday and Friday)
Delete - Deletes a time range profile.
When a time_range profile has been associated with ACL entries, the
delete of this time_range profile will fail.
Restrictions You must have Operator or Administrator - level privileges.
Example usage:
To config the current time range on the Switch:
DES-3526:admin#config time_range test hours start_time 11:0:0 end_time
12:0:0 weekdays sun,tue
Command: config time_range test hours start_time 11:0:0 end_time 12:0:0
weekdays sun,tue
Success.
Success.Success.
Success.
DES-3526:admin#