Filter
Top Products
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
163
DES-3526:admin# DES-3526:admin#config
dhcp_relay option_82 remote_id default
Command: config dhcp_relay option_82 remote_id
default
Success.
DES-3526:admin#
show dhcp_relay
Purpose Used to display the current DHCP/BOOTP relay configuration.
Syntax
show dhcp_relay {ipif <ipif_name 12>}
Description This command will display the current DHCP relay configuration for the
Switch, or if an IP interface name is specified, the DHCP relay configuration
for that IP interface.
Parameters
ipif <ipif_name 12> - The name of the IP interface for which to display the
current DHCP relay configuration.
Restrictions None.
Example usage:
To show the DHCP relay configuration:
DES-3526:admin#show dhcp_relay
Command: show dhcp_relay
DHCP/BOOTP Relay Status : Enabled
DHCP/BOOTP Hops Count Limit : 2
DHCP/BOOTP Relay Time Threshold : 23
DHCP Relay Agent Information Option 82 State : Enabled
DHCP Relay Agent Information Option 82 Check : Enabled
DHCP Relay Agent Information Option 82 Policy : Replace
Interface Server 1 Server 2 Server 3 Server 4
---------- ------------ ----------- ---------- -----------
System 10.58.44.6
DES-3526:admin#
Example usage:
To show a single IP destination of the DHCP relay configuration:
DES-3526:admin#show dhcp_relay ipif System
Command: show dhcp_relay ipif System
Interface Server 1 Server 2 Server 3 Server 4
---------- ------------- ------------ ------------ --------------
System 10.58.44.6
DES-3526:admin#
enable dhcp_relay
Purpose Used to enable the DHCP/BOOTP relay function on the Switch.
Syntax
enable dhcp_relay
Description This command is used to enable the DHCP/BOOTP relay function on
the Switch.