Filter
Top Products
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
52
DES-3526:admin#config snmp system_location HQ
5F
Command: config snmp system_location HQ 5F
Success.
DES-3526:admin#
config snmp system_name
Purpose Used to configure the name for the Switch.
Syntax
config snmp system_name {<sw_name>}
Description
The config snmp system_name command configures the name of
the Switch.
Parameters
<sw_name> - A maximum of 255 characters is allowed. A NULL
string is accepted if no name is desired.
Restrictions Only Administrator and Operator-level users can issue this
command.
Example usage:
To configure the Switch name for “DES-3526 Switch
”:
DES-3526:admin#config snmp system_name DES-3526
Switch
Command: config snmp system_name DES-3526 Switch
Success.
DES-3526:admin#
enable rmon
Purpose Used to enable RMON on the Switch.
Syntax
enable rmon
Description
This command is used, in conjunction with the disable rmon
command below, to enable and disable remote monitoring (RMON)
on the Switch.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this
command.
Example usage:
To enable RMON:
DES-3526:admin#enable rmon
Command: enable rmon
Success.
DES-3526:admin#