Filter
Top Products
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
174
show 802.1x auth_state
Purpose Used to display the current authentication state of the 802.1x server
on the Switch.
Syntax
show 802.1x auth_state {ports <portlist>}
Description
The show 802.1x auth_state command is used to display the
current authentication state of the 802.1x Port-based or MAC-based
Network Access Control server application on the Switch.
Parameters
ports <portlist> − Specifies a port or range of ports to be viewed.
The following details what is displayed:
Port number − Shows the physical port number on the Switch.
Auth PAE State: Initalize / Disconnected / Connecting /
Authenticating / Authenticated / Held / ForceAuth / ForceUnauth −
Shows the current state of the Authenticator PAE.
Backend State: Request / Response / Fail / Idle / Initalize / Success /
Timeout − Shows the current state of the Backend Authenticator.
Port Status: Authorized / Unauthorized − Shows the result of the
authentication process. Authorized means that the user was
authenticated, and can access the network. Unauthorized means
that the user was not authenticated, and cannot access the network.
Restrictions None.
Example usage:
To display the 802.1x auth state for Port-based 802.1x:
DES-3526:admin#show 802.1x auth_state
Command: show 802.1x auth_state
Port Auth PAE State Backend State Port Status
------ -------------------- ------------------- -----------------
1 ForceAuth Success Authorized
2 ForceAuth Success Authorized
3 ForceAuth Success Authorized
4 ForceAuth Success Authorized
5 ForceAuth Success Authorized
6 ForceAuth Success Authorized
7 ForceAuth Success Authorized
8 ForceAuth Success Authorized
9 ForceAuth Success Authorized
10 ForceAuth Success Authorized
11 ForceAuth Success Authorized
12 ForceAuth Success Authorized
13 ForceAuth Success Authorized
14 ForceAuth Success Authorized
15 ForceAuth Success Authorized
16 ForceAuth Success Authorized
17 ForceAuth Success Authorized
18 ForceAuth Success Authorized
19 ForceAuth Success Authorized
20 ForceAuth Success Authorized
CTRL+C ESC q Quit SPACE n Next Page Enter Next Entry a All
Example usage:
To display the 802.1x auth state for MAC-based 802.1x: