Filter
Top Products
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
83
delete stp instance_id
Description This command allows the user to delete a previously configured
STP instance ID from the Switch.
Parameters
<value 1-4> Enter a value between 1 and 4 to identify the
Spanning Tree instance on the Switch.
Restrictions Only Administrator and Operator-level users can issue this
command.
Example usage:
To delete STP instance ID 2 from the Switch.
DES-3526:admin#delete stp instance_id 2
Command: delete stp instance_id 2
Success.
DES-3526:admin#
config stp priority
Purpose Used to update the STP instance configuration
Syntax
config stp priority <value 0-61440> instance_id <value 0-4>
Description This command is used to update the STP instance configuration
settings on the Switch. The MSTP will utilize the priority in selecting
the root bridge, root port and designated port. Assigning higher
priorities to STP regions will instruct the Switch to give precedence to
the selected instance_id for forwarding packets. The lower the
priority value set, the higher the priority.
Parameters
priority <value 0-61440> - Select a value between 0 and 61440 to
specify the priority for a specified instance ID for forwarding packets.
The lower the value, the higher the priority. This entry must be
divisible by 4094.
instance_id <value 0-4> - Enter the value corresponding to the
previously configured instance ID of which the user wishes to set the
priority value. An instance id of 0 denotes the default instance_id
(CIST) internally set on the Switch.
Restrictions Only Administrator and Operator-level users can issue this
command.
Example usage:
To set the priority value for instance_id 2 as 4096.
DES-3526:admin#config stp priority 4096 instance_id 2
Command : config stp priority 4096 instance_id 2
Success.
DES-3526:admin#
config stp mst_config_id
Purpose Used to update the MSTP configuration identification.
Syntax
config stp mst_config_id {revision_level <int 0-65535> | name
<string 32>}