Filter
Top Products
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
22
config greeting _message
Purpose Used to configure the login banner (greeting message).
Syntax
config greeting _message {default}
Description Users can use this command to modify the login banner (greeting
message).
Parameters
default – If the user enters default to the modify banner command, then
the banner will be reset to the original factory banner.
To open the Banner Editor, click enter after typing the config
greeting_message command. Type the information to be displayed on
the banner by using the commands described on the Banner Editor:
Quit without save: Ctrl+C
Save and quit: Ctrl+W
Move cursor: Left/Right/Up/Down
Delete line: Ctrl+D
Erase all setting: Ctrl+X
Reload original setting: Ctrl+L
Restrictions Only Administrator and Operator-level users can issue this command.
Other restrictions include:
• If the “reset/reset config” command is executed, the modified
banner will remain modified. However, the “reset system”
command will reset the modified banner to the original factory
banner.
• The capacity of the banner is 6*80. 6 Lines and 80 characters per
line.
• Ctrl+W will only save the modified banner in the DRAM. Users
need to type the “save” command to save it into FLASH.
• Only valid in threshold level.
Example usage:
To modify the banner to read “Good evening Mr. Bond.”:
DES-3526:admin# config greeting_message
Command: config greeting_message
Greeting Messages Editor
================================================================================
DES-3526 Fast Ethernet Switch
Command Line Interface
Firmware: Build 5.01-B47
Copyright(C) 2004-2007 D-Link Corporation. All rights reserved.
================================================================================
<Function Key> <Control Key>
Ctrl+C Quit without save left/right/
Ctrl+W Save and quit up/down Move cursor
Ctrl+D Delete line
Ctrl+X Erase all setting
Ctrl+L Reload original setting
--------------------------------------------------------------------------------