Filter
Top Products
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
201
DES-3526:admin#show flow_meter
Command: show flow_meter
Flow Metering Information
Profile Id Access Id Metering Rate(Kbps) Rate Exceed Action
---------- --------- ------------------- -------------------
1 1 1000 drop_packet
Total Entries : 1
DES-3526:admin#
show current_config access_profile
Purpose Used to show the ACL CLI commands in current configuration.
Syntax
show current_config access_profile
Description The ACL part will be displayed by this command.
Parameters None
Restrictions None
Example usage:
To show the current config access profile on the Switch:
DES-3526:admin# show current_config access_profile
Command: show current_config access_profile
#----------------------------------------------------------------
# ACL
create access_profile ethernet vlan profile_id 1
config access_profile profile_id 1 add access_id 1 ethernet vlan
default port 1
permit
disable cpu_interface_filtering
#----------------------------------------------------------------
DES-3526:admin#
config time_range
Purpose Used to configure the range of time to activate a function on the switch.
Syntax
<range_name 32> [ hours start_time < hh:mm:ss > end_time<
hh:mm:ss > weekdays <daylist> | delete]
Description This command defines a specific range of time to activate a function on the
Switch by specifying which time range in a day and which days in a week
are covered in the time range. Note that the specified time range is based
on SNTP time or configured time. If this time is not available, then the time
range will not be met. There are a maximum of 64 entries.
Parameters
range_name - Specifies the name of the time range settings.