Filter
Top Products
103
Command Mode
Interface Config.
ip igmp snooping vlan static
This command is used to add a port to a multicast group.
Syntax
ip igmp snooping vlan <vlanid> static <macaddr> interface <slot/port>
<vlanid> - VLAN ID (Range: 1 – 3965).
<macaddr> - Multicast group MAC address.
<slot/port> - Interface number.
Default Setting
None
Command Mode
Global Config
Command Usage
The maximum number of static router ports that can be configured is 64.
set igmp
This command enables IGMP snooping on a particular VLAN, and in turn enabling IGMP
snooping on all interfaces participating in this VLAN.
Syntax
set igmp <1-3965>
no set igmp <1-3965>
<1-3965> - VLAN ID (Range: 1 – 3965).
no - This command disables IGMP snooping on a particular VLAN, and in turn disabling IGMP snooping
on all interfaces participating in this VLAN.