Filter
Top Products
290
Command Mode
Privileged EXEC, User EXEC
Display Message
The following information is repeated for each user priority.
IP Precedence The IP Precedence value.
Traffic Class The traffic class internal queue identifier to which the IP Precedence value is mapped.
5.14.1.3 show queue trust
This command displays the current trust mode setting for a specific interface. The slot/port
parameter is optional and is only valid on platforms that support independent per-port class
of service mappings. If specified, the port trust mode of the interface is displayed. If omitted,
the port trust mode of each interface in the system is shown. If the platform does not support
independent per-port class of service mappings, the output represents the system-wide port
trust mode used for all interfaces.
Syntax
show queue trust [<slot/port>]
< slot/port > The interface number.
Default Setting
None
Command Mode
Privileged EXEC, User EXEC
Display Message
Class of Service Trust Mode The trust mode of this interface.
Non-IP Traffic ClassThe traffic class used for non-IP traffic. This is only displayed when the COS trust
mode is set to either 'trust ip-dscp' or 'trust ip-precedence'.
Untrusted Traffic Class The traffic class used for all untrusted traffic. This is only displayed when the
COS trust mode is set to 'untrusted'.