Fortinet MR1 Switch User Manual


 
477
Address - Specifies the address of the SNTP server. This is a text string of up to 64 characters
containing the encoded unicast IP address or hostname of a SNTP server. Unicast SNTP requests will
be sent to this address. If this address is a DNS hostname, then that hostname should be resolved into
an IP address each time a SNTP request is sent to it.
Address Type - Specifies the address type of the configured SNTP Server address. Allowed types
are :
Unknown
IPV4
DNS
Default value is Unknown
Port - Specifies the port on the server to which SNTP requests are to be sent. Allowed range is (1 to
65535). Default value is 123.
Priority - Specifies the priority of this server entry in determining the sequence of servers to which
SNTP requests will be sent. The client continues sending requests to different servers until a
successful response is received or all servers are exhausted. This object indicates the order in which to
query the servers. A server entry with a precedence of 1 will be queried before a server with a priority of
2, and so forth. If more than one server has the same priority then the requesting order will follow the
lexicographical ordering of the entries in this table. Allowed range is (1 to 3). Default value is 1.
Version - Specifies the NTP Version running on the server. Allowed range is (1 to 4). Default value is 4.
Command Buttons
Submit - Sends the updated configuration to the switch. Configuration changes take effect
immediately.
Delete - Deletes the SNTP Server entry. Sends the updated configuration to the switch. Configuration
changes take effect immediately.
Viewing SNTP Server Status Page
Non-Configurable Data