Filter
Top Products
364
0
Command Mode
Router RIP Config
6.6.2.10 redistribute
This command configures RIP protocol to redistribute routes from the specified source
protocol/routers. There are five possible match options. When you submit the command
redistribute ospf match <matchtype> the match-type or types specified are added to any
match types presently being redistributed. Internal routes are redistributed by default.
Source protocols have OSPF, Static, and Connetced. Match types will have internal,
external 1, external 2, nssa-external 1, and nssa-external 2.
Syntax
Format for OSPF as source protocol:
redistribute ospf [metric <1-15>] [match [internal] [external 1] [external 2] [nssa-external
1] [nssa-external 2]]
Format for other source protocols:
redistribute {static | connected} [metric <1-15>]
no redistribute {ospf | static | connected} [metric] [match [internal] [external 1] [external 2]
[nssa-external 1] [nssa-external 2]]
<1 - 15> - a value for metric.
no - This command de-configures RIP protocol to redistribute routes from the specified source
protocol/routers.
Default Setting
Metric - not-configured
Match - internal
Command Mode
Router RIP Config
6.6.2.11 ip rip authentication
This command sets the RIP Version 2 Authentication Type and Key for the specified
interface. The value of <type> is either none, simple, or encrypt.