Filter
Top Products
125
Syntax
no port-monitor
Default Setting
None
Command Mode
Global Config
5.2.9.3 port-monitor session mode
This command configures the administration mode of port-monitoring function for a monitor
session.
Syntax
port-monitor session <session-id> mode
no port-monitor session <session-id> mode
<session-id> - Session ID.
no - This command disables port-monitoring function for a monitor session.
5.3 Management Commands
5.3.1 Network Commands
5.3.1.1 show ip interface
This command displays configuration settings associated with the switch's network interface.
The network interface is the logical interface used for in-band connectivity with the switch via
any of the switch's front panel ports. The configuration parameters associated with the
switch's network interface do not affect the configuration of the front panel ports through
which traffic is switched or routed.