Filter
Top Products
43
• Routing
• Security
• QoS
• IP Multicast
Figure 4-4: Main Menus
Secondary Menus
The Secondary Menus under the Main Menu contain a host of options that you can use
to configure your switch. The online help contains a detailed description of the features on
each screen. You can click the ‘help’ or the question mark at the top right of each screen to
view the help menu topics.
The Secondary Menus are detailed below, with cross-references to the sections in this
manual that contain the corresponding command descriptions.
System
• ARP Cache — see “show arp”
• Inventory — see “show hardware”
• Configuration — see “Management Commands and Device Configuration Commands”
• Forwarding Database — see “Device Configuration Commands’ L2MAC Address”
• Logs — see “System Information and Statistics Commands”
• Port — see “Device Configuration Commands’ Interface”
• SNMP — see “SNMP Server Commands and SNMP Trap Commands”
• Statistics — see “show interface counters”
• System Utilities — see “System Utilities”
• Trap Manager — see “show traplog and SNMP Trap Commands”
• SNTP — see “SNTP Commands”
• DHCP Client — see “DHCP Client Commands”
Switching
• VLAN — see “VLAN Management Commands”
• Protocol-based VLAN — see “VLAN Management Commands”
• GARP — see “GVRP and Bridge Extension Commands”
• IGMP Snooping — see “IGMP Snooping Commands”
• Port Channel — see “Port Channel Commands”
• Multicast Forwarding DataBase — see “L2 MAC Address and Multicast Forwarding
Database Tables Commands”