Filter
Top Products
308
show ip brief
Default Setting
None
Command Mode
Privileged Exec, User Exec
Display Message
Default Time to Live: The computed TTL (Time to Live) of forwarding a packet from the local router to the
final destination.
Routing Mode: Show whether the routing mode is enabled or disabled.
IP Forwarding Mode: Disable or enable the forwarding of IP frames.
Maximum Next Hops: The maximum number of hops supported by this switch.
6.2.1.2 show ip interface port
This command displays all pertinent information about the IP interfaces.
Syntax
show ip interface port <slot/port>
Default Setting
None
Command Mode
Privileged Exec, User Exec
Display Message
IP Address: Is an IP address representing the subnet configuration of the router interface.
Subnet Mask: Is a mask of the network and host portion of the IP address for the router interface.
Routing Mode: Is the administrative mode of router interface participation. The possible values are enable
or disable.
Administrative Mode Is the administrative mode of the specified interface. The possible values of this field
are enable or disable. This value was configured into the unit.
Forward Net Directed Broadcasts: Displays whether forwarding of network-directed broadcasts is
enabled or disabled.
Active State: Displays whether the interface is active or inactive. An interface is considered active if its link
is up and it is in forwarding state.