Filter
Top Products
95
Syntax
garp timer leaveall all < 200-6000 >
no garp timer leaveall all
<200-6000> - leave time (Range: 200 – 6000) in centiseconds.
all - All interfaces.
no - This command sets how frequently Leave All PDUs are generated for all ports to 1000 centiseconds
(10 seconds).
Note: This command has an effect only when GVRP and GMRP are enabled.
Default Setting
1000 centiseconds (10 seconds)
Command Mode
Global Config
5.2.5 IGMP Snooping
5.2.5.1 Show Commands
show ip igmp snooping
This command displays IGMP Snooping information. Configured information is displayed
whether or not IGMP Snooping is enabled. Status information is only displayed when IGMP
Snooping is enabled.
Syntax
show ip igmp snooping
Default Setting
None
Command Mode
Privileged Exec