Filter
Top Products
565
Local - This field displays the local route preference value.
Command Buttons
Submit - Send the updated configuration to the switch. Configuration changes take effect immediately.
These changes will not be retained across a power cycle unless a save is performed.
8.2.3.9 Managing VLAN Routing
Configuring VLAN Routing
Selection Criteria
VLAN ID - Enter the ID of a VLAN you want to configure for VLAN Routing. Initially, the field will display
the ID of the first VLAN. After you enter a new VLAN ID and click on the Create button the
non-configurable data will be displayed. See below for detailed instructions on how to use that data to
complete the configuration of the VLAN.
Non-Configurable Data
Slot/Port - The interface assigned to the VLAN for routing.
MAC Address - The MAC Address assigned to the VLAN Routing Interface
Command Buttons
Create - Send the updated configuration to the switch. Configuration changes take effect immediately.
These changes will not be retained across a power cycle unless a save is performed.
Delete - Remove the VLAN Routing Interface specified in the VLAN ID input field from the router
configuration.