Filter
Top Products
370
6.7.7 ip irdp preference
This command configures the preferability of the address as a default router address, relative
to other router addresses on the same subnet.
Syntax
ip irdp preference < -2147483648-2147483647>
no ip irdp preference
< -2147483648-2147483647> - The range is -2147483648 to 2147483647.
no - This command sets the preference to 0.
Default Setting
The default value is 0.
Command Mode
Global Config
6.8 VLAN Routing Commands
6.8.1 show ip vlan
This command displays the VLAN routing information for all VLANs with routing enabled in
the
system.
Syntax
show ip vlan
Default Setting
None
Command Mode
Privileged Exec, User Exec
Display Message
MAC Address used by Routing VLANs Is the MAC Address associated with the internal bridgerouter
interface (IBRI). The same MAC Address is used by all VLAN routing interfaces. It will be displayed above
the per-VLAN information.
VLAN ID Is the identifier of the VLAN.