Filter
Top Products
303
show ip arp brief
Default Setting
None
Command Mode
Privileged Exec
Display Message
Age Time: Is the time it takes for an ARP entry to age out. This value was configured into the unit. Age time
is measured in seconds.
Response Time: Is the time it takes for an ARP request timeout. This value was configured into the unit.
Response time is measured in seconds.
Retries: Is the maximum number of times an ARP request is retried. This value was configured into the unit.
Cache Size: Is the maximum number of entries in the ARP table. This value was configured into the unit.
Dynamic renew mode: Displays whether the ARP component automatically attempts to renew dynamic
ARP entries when they aged out.
Total Entry Count Current/Peak: Field listing the total entries in the ARP table and the peak entry count in
the ARP table.
Static Entry Count Configured/Active/Max: Field listing the configured static entry count, active static
entry count, and maximum static entry count in the ARP table.
6.1.1.3 show ip arp static
This command displays the static Address Resolution Protocol (ARP) table information.
Syntax
show ip arp static
Default Setting
None
Command Mode
Privileged Exec
Display Message
IP address: Is the IP address of a device on a subnet attached to an existing routing interface.
MAC address: Is the MAC address for that device.