Filter
Top Products
412
< slot/port > - Interface number.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Slot/Port: Valid slot and port number separated by a forward slash.
IP Address: This field indicates the IP address of the specified interface.
Subnet Mask: This field indicates the Subnet Mask for the IP address of the PIM interface.
Mode: This field indicates whether PIM-SM is enabled or disabled on the specified interface. This is a
configured value. By default it is disabled.
Hello Interval: This field indicates the frequency at which PIM hello messages are transmitted on this
interface. This is a configured value. By default, the value is 30 seconds.
CBSR Preference: This field shows the preference value for the local interface as a candidate bootstrap
router. This is a configured value.
CRP Preference: This field shows the preference value as a candidate rendezvous point on this interface.
CBSR Hash Mask Length: This field shows the hash mask length to be advertised in bootstrap messages
if this interface is elected as the bootstrap router. The value is used in the hash algorithm for selecting the
RP for a particular group.
7.5.1.4 show ip pimsm interface stats
This command displays the statistical information for PIM-SM on the specified interface.
Syntax
show ip pimsm interface stats {<slot/port> | all}
< slot/port > - Interface number.
all - this command represents all interfaces.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Interface: Valid slot and port number separated by a forward slash.
IP Address: This field indicates the IP Address that represents the PIM-SM interface.