Filter
Top Products
143
Authentication Flag: May be enabled or disabled. The factory default is enabled. Indicates whether
authentication failure traps will be sent.
Link Up/Down Flag: May be enabled or disabled. The factory default is enabled. Indicates whether link
status traps will be sent.
Multiple Users Flag: May be enabled or disabled. The factory default is enabled. Indicates whether a trap
will be sent when the same user ID is logged into the switch more than once at the same time (either via
telnet or serial port).
Spanning Tree Flag: May be enabled or disabled. The factory default is enabled. Indicates whether
spanning tree traps will be sent.
DVMRP Traps May be enabled or disabled. The factory default is disabled. Indicates whether DVMRP
traps will be sent.
OSPF Traps May be enabled or disabled. The factory default is disabled. Indicates whether OSPF traps
will be sent.
PIM Traps May be enabled or disabled. The factory default is disabled. Indicates whether PIM traps will be
sent.
5.3.4.3 snmp-server sysname
This command sets the name of the switch. The range for name is from 1 to 31 alphanumeric
characters.
Syntax
snmp-server sysname <name>
<name> - Range is from 1 to 31 alphanumeric characters.
Default Setting
None
Command Mode
Global Config
5.3.4.4 snmp-server location
This command sets the physical location of the switch. The range for name is from 1 to 31
alphanumeric characters.
Syntax