Filter
Top Products
406
no disable ip multicast mdebug mtrace
no - This command is used to enable the processing capability of mtrace query on this router. If the mode
is enabled, the mtrace queries received by the router are processed and forwarded appropriately by the
router. If the mode is disabled, this router does not respond to the mtrace queries it receives from other
router devices.
Default Setting
None
Command Mode
Global Config
7.4 Protocol Independent Multicast – Dense
Mode (PIM-DM) Commands
7.4.1 Show Commands
7.4.1.1 show ip pimdm
This command displays the system-wide information for PIM-DM.
Syntax
show ip pimdm
Default Setting
None
Command Mode
Privileged Exec
Display Message
Admin Mode: This field indicates whether PIM-DM is enabled or disabled. This is a configured value.
Interface: Valid slot and port number separated by a forward slash.
Interface Mode: This field indicates whether PIM-DM is enabled or disabled on this interface. This is a
configured value.
Protocol State: This field indicates the current state of PIM-DM on this interface. Possible values are
Operational or Non-Operational.