Filter
Top Products
420
7.5.2.9 ip pimsm cbsrhashmasklength
This command is used to configure the CBSR hash mask length to be advertised in bootstrap
messages for a particular PIM-SM interface. This hash mask length will be used in the hash
algorithm for selecting the RP for a particular group. The valid range is 0 - 32. The default
value is 30.
Syntax
ip pimsm cbsrhashmasklength <0 - 32>
no ip pimsm cbsrhashmasklength
<0 - 32> - The CBSR hash mask length.
no - This command is used to reset the CBSR hash mask length for a particular PIM-SM interface to the
default value.
Default Setting
30
Command Mode
Interface Config
7.5.2.10 ip pimsm crppreference
This command is used to configure the Candidate Rendezvous Point (CRP) for a particular
PIM-SM interface. The valid values are from (-1 to 255), and the value of -1 is used to
indicate that the local interface is not a Candidate RP interface.
The active router interface, with the highest IP Address and crppreference greater than -1, is
chosen as the CRP for the router. The default value is 0.
In the CRP advertisements sent to the bootstrap router (BSR), the router interface advertises
itself as the CRP for the group range 224.0.0.0 mask 240.0.0.0.
Syntax
ip pimsm crppreference <-1 - 255>
no ip pimsm crppreference