Filter
Top Products
487
Slot/Port(s) - Select the interface(s) you want to be included in the group. Note that a given interface can
only belong to one group for a given protocol. If you have already added interface 0.1 to a group for IP,
you cannot add it to another group that also includes IP, although you could add it to a new group for IPX.
Non-Configurable Data
Group ID - A number used to identify the group created by the user. Group IDs are automatically
assigned when a group is created by the user.
Command Buttons
Submit - Update the switch with the values on this screen. If you want the switch to retain the new values
across a power cycle, you must perform a save.
Delete - Remove the Protocol Based VLAN group identified by the value in the Group ID field. If you want
the switch to retain the deletion across a power cycle, you must perform a save.
Viewing Protocol-based VLAN Information Page
Non-Configurable Data
Group Name - The name associated with the group. Group names can be up to 16 characters. The
maximum number of groups allowed is 128.
Group ID - The number used to identify the group. It was automatically assigned when you created the
group.
Protocol(s) - The protocol(s) that belongs to the group. There are three configurable protocols: IP, IPX,
and ARP.
IP - IP is a network layer protocol that provides a connectionless service for the delivery of data.
ARP - Address Resolution Protocol (ARP) is a low-level protocol that dynamically maps network
layer addresses to physical medium access control (MAC) addresses.
IPX - The Internetwork Packet Exchange (IPX) is a connectionless datagram Network-layer protocol
that forwards data over a network.