Filter
Top Products
146
Command Mode
Global Config
This command sets a client IP mask for an SNMP community. The address is the associated
community SNMP packet sending address and is used along with the client IP address value
to denote a range of IP addresses from which SNMP clients may use that community to
access the device. A value of 255.255.255.255 will allow access from only one station, and
will use that machine's IP address for the client IP Address. A value of 0.0.0.0 will allow
access from any IP address. The name is the applicable community name.
Syntax
snmp-server community ipmask <ipmask> <name>
no snmp-server community ipmask <name>
<name> - community name.
<ipmask> - a client IP mask.
no - This command sets a client IP mask for an SNMP community to 0.0.0.0. The name is the applicable
community name. The community name may be up to 16 alphanumeric characters.
Default Setting
0.0.0.0
Command Mode
Global Config
This command restricts access to switch information. The access mode is read-only (also
called public) or read/write (also called private).
Syntax
snmp-server community {ro | rw} <name>
<name> - community name.