Filter
Top Products
348
6.4.4 bootpdhcprelay maxhopcount
This command configures the maximum allowable relay agent hops for BootP/DHCP Relay
on the system.
Syntax
bootpdhcprelay maxhopcount <1-16>
no bootpdhcprelay maxhopcount
<count> - The range of maximum hop count is 1 to 16.
no - Set the maximum hop count to 4.
Default Setting
The default value is 4.
Command Mode
Global Config
6.4.5 bootpdhcprelay minwaittime
This command configures the minimum wait time in seconds for BootP/DHCP Relay on the
system. When the BOOTP relay agent receives a BOOTREQUEST message, it may use the
seconds-since-client-began-booting field of the request as a factor in deciding whether to
relay the request or not.
Syntax
bootpdhcprelay minwaittime <0-100>
no bootpdhcprelay minwaittime
<seconds> - The range of minimum wait time is 0 to 100.
no - Set the minimum wait time to 0 seconds.
Default Setting
The default value is 0.
Command Mode
Global Config